Right click and select "view image" for full size.

Click to see the new Customer Rides Page!

San Diego Off Road Innovations LLC

Specializing in 1st and 2nd gen Toyota 4X4's and soon Hummer H3's

The 3rd Annual Upper Peninsula Overland Adventure is just around the corner (08/10/10), trip report to follow! (www.upoverland.org)

Frame braces and Idler arm bushings are now available, check the parts section or see our vendors!

 

Right click and select "view image" for full size.

Instructions

Parts

 

Contact Us!

Trip Reports, etc..!

2nd Annual Upper Pensinsula Overland Adventure

Two Trackers Annual Forest Clean Up Trip Report

Frame braces are here!

Prototype Frame BraceIFS Frame Brace

In development,4Runner Skid Plates and Hummer H3 Rock Boards

H3 Rock Boards

 

DISCLAIMER

San Diego Off Road Innovations LLC products can be purchased along with many other related 4X4 parts at the following vendors:

4Crawler Offroad   TRDParts4U.com Spain: Email  with ordering information

 www.4runnerforo.com

Toytec Lifts

                  

Need a shop to install your SDORI product?

 

Announcements:

02/09 1st and 2nd gen Toyota skid plates are in development, Hummer H3 Rock Boards, Toyota Idler Arm Braces, and Hummer skid plates are next.

02/09 The 3rd Annual Upper Peninsual Overland Adventure was announced here . We'll be there!

08/09 SDORI took part in the 2nd Annual Upper Peninsula Overland Adventure, it was a blast as always.

07/01/09 SDORI enjoyed taking part in the Central Coast Meet and Greet organized on Expedition Portal. Great people and great times.

05/15/09 SDORI is now taking orders for our idler arm bushings!

04/27/09 We have modified our idler design and are running another batch of parts. We plan to begin taking orders 05/15/09. We have reached an advanced stage of development of an IFS frame brace. The final is a couple of months out. Pricing will be announced.

SDORI will be expanding their line up to support the Hummer H3. Rock slider development has begun in earnest.

04/19/09 We have ran a small batch of bronze idler bushings to verify print and manufacturing tolerances. We will running a large batch in the next few weeks and hope to have them up for sale in a month.

Check out our Two Trackers Annual Adapot a Forest trail clean up trip report!

12/12/08 Bronze idler bushings are running a bit behind and will likely be availabe after the first of the new year.

11/13/08 Coming soon, bronze idler arm bushings. These are expected to be available for select brands of idler arms 12/1/08.

10/13/08 Well we have survived our sever migration which took down many aspects of the site. A new Theory of Operation page is up and designed such that it won't kill a black ink cartrige printing it up.

10/10/08 SDORI is currently testing two new products. The first are a set of oil impregnated bronze idler bearings to replace failure prone OEM plastic bushings. The second are a pair of 4th generation 4runner coil spring spacers. Stay tuned for updates!

7/21/08 Beware of cheap upper ball joints. SDORI has found that many Moog upper 86-95 ball joints are not dimensionally similar to the OEM. The bolt holes line up, but the foot print is smaller which puts more stress on the a-arm or spacer. Napa and the dealer are two options we know of that sell accurate aftermarket ball joints.

11/08/07 The hit counter has been redone.

10/17/07    If you have some action shots of SDORI products on your truck and would like pictures posted on our website, please email them to us and we'll make it happen!

10/16/07    SDORI would like to extend our thanks and gratitude to Bob, Lance, and Chris from the Ultimateyota board for making the

5th Annual Pismo 4runner Jamboree so much fun!  The event was excellently organized.  Claire and I enjoyed meeting many new faces and hope to join you all again off the pavement soon.

This page as been viewed
click here for a fancy web counter
free hit counter html code
times.